Foam Faucet Joint

Country of origin: China
Material: Body: Polyacetal
Product size: Nipple: 3 x 3 x 3.3 cm Adapter A: 3.1 x 3.1 x 1.5 cm Adapter B: 2.9 x 2.9 x 2 cm Adapter C: 2.9 x 2.9 x 1.7 cm
Total weight 22.1g
Contents: 4 pieces
Type: None
Connect the hose to the foam faucet. For outdoor watering in general households. Hose connectors are sold separately. Nipple for foam faucet (diameter: 22 mm) – Depending on the foam faucet, this nipple is the only one needed to install it. – If you are using an adapter, connect the nipple under the adapter. Adapter A: Adapter for external thread (diameter: 22mm) B: Adapter for internal thread (diameter: 24mm) C: Adapter for internal thread (diameter: 23mm) – Connect the long end of the adapter to the faucet side and the short end to the nipple side. -The included gasket and O-ring are to prevent water leakage, so be careful not to lose them. How to install: Remove the foam cap from the foam faucet and select either the nipple only or the adapter depending on the type of faucet you are using. *Be careful not to lose the removed foam cap. Removal method The adapter or nipple may be difficult to remove. In that case, wrap the product in a soft cloth and use a wrench to remove it. If it gets dirty, wipe it with a soft cloth. If detergent or oil gets on this product, the plastic part may crack.
●Please store away from direct sunlight. Please use a pressure hose. To prevent damage due to water pressure or freezing, be sure to close the faucet and drain the water from the product and hose after use. Do not use in equipment with automatic water supply and drainage, such as fully automatic washing machines and dishwashers. of the faucet
Please note that some faucets cannot be installed depending on the type.
●Do not disassemble or modify the product.
●Discontinue use if deformed or damaged.
●Do not place near fire or heat sources.
●Do not use for other purposes

Features:
Total weight 22.1g
Connect the hose to the foam faucet. For outdoor watering in general households. Hose connectors are sold separately. Nipple for foam faucet (diameter: 22 mm) – Depending on the foam faucet, this nipple is the only one needed to install it. – If you are using an adapter, connect the nipple under the adapter. Adapter A: Adapter for external thread (diameter: 22mm) B: Adapter for internal thread (diameter: 24mm) C: Adapter for internal thread (diameter: 23mm) – Connect the long end of the adapter to the faucet side and the short end to the nipple side. -The included gasket and O-ring are to prevent water leakage, so be careful not to lose them. How to install: Remove the foam cap from the foam faucet and select either the nipple only or the adapter depending on the type of faucet you are using. *Be careful not to lose the removed foam cap. Removal method The adapter or nipple may be difficult to remove. In that case, wrap the product in a soft cloth and use a wrench to remove it. If it gets dirty, wipe it with a soft cloth. If detergent or oil gets on this product, the plastic part may crack.
Please note that some faucets cannot be installed depending on the type.

Warnings / Instructions:
●Please store away from direct sunlight. Please use a pressure hose. To prevent damage due to water pressure or freezing, be sure to close the faucet and drain the water from the product and hose after use. Do not use in equipment with automatic water supply and drainage, such as fully automatic washing machines and dishwashers. of the faucet
●Do not disassemble or modify the product.
●Discontinue use if deformed or damaged.
●Do not place near fire or heat sources.
●Do not use for other purposes

Country of origin: China.

This product is shipped from Japan.